IQOS ORIGINAL DUO TORQOUISE

AED300AED700 (-57%)

In stock

Category:

Discover the functionalities of your IQOS ORIGINALS DUO TORQOUISE through these detailed steps:

Getting Acquainted with Your Device

  1. Assembly: Place the IQOS ORIGINALS heating tube into the pocket charger.
  2. Power On/Off: Press the pocket charger button for 4 seconds to toggle the device on or off. Turning off the pocket charger will simultaneously deactivate the heat pipe.
  3. Status Indicators:
    • Charging Status: Observe the strip lights on the Pocket Charger; 4 illuminated lights indicate over 75% charge.
    • Heater Tube Status: Circular lights on the pocket charger indicate:
      • A pulsing white light signifies the heating tube is charging.
      • Two full circle lights indicate readiness for two consecutive trials.
  4. Full Charge: Allow the pocket charger to fully charge the heating tube.
  5. Ready to Use: Now familiarize yourself with the main features—your IQOS ORIGINALS DUO is primed for use. Refer to the demo video for further insights.

How to Use Your IQOS ORIGINALS DUO

  1. Preparation: Remove the fully charged heating tube from the pocket charger.
  2. Insert HEETS Stick: Gently insert the HEETS tobacco stick into the heating tube, ensuring it stops at the silver line. Avoid twisting or pinching the stick.
  3. Initiate Heating: Press the heating tube button until it vibrates. Observe the pulsing lights as the device prepares. Wait for two vibrations and steady lights to proceed.
  4. Usage Instructions: You’re set to use the device! Each trial accommodates up to 14 puffs or 6 minutes, whichever comes first. Look for vibrating cues and pulsing lights for remaining puffs/time.
  5. After Usage: Pull the top cover upward, remove the tobacco stick, and re-secure the top cover. Verify remaining trials through the light indicators.
  6. Further Guidance: Explore the demo video for detailed instructions on using your IQOS ORIGINALS DUO.

Charging Your IQOS ORIGINALS DUO

  1. Charging Procedure: Place the heating tube into the pocket charger.
  2. Checking Charger Status: Observe strip lights on the Pocket Charger; a single flashing light indicates low charge.
  3. Charging Process: Use the original power adapter and cable to connect the pocket charger to a power source. The flashing lights on the strip signal charging.
  4. Critical Note: Always employ the original adapter and cable for charging to ensure uninterrupted experiences.
  5. Optimal Charging: Ensure the pocket charger attains full charge for up to 20 heat stick experiences.
  6. Detailed Guidance: Consult the demo video for comprehensive instructions on charging your IQOS ORIGINALS DUO.

Cleaning Your IQOS ORIGINALS DUO

  1. Pre-Cleaning: Allow the heating tube to cool for at least 30 seconds after the last use.
  2. Initial Steps: Lift the top cap and tap to remove any tobacco residue.
  3. Cleaning Process: Utilize the cleaning tool to remove deposits; follow the tool’s rotational and sweeping motions as guided.
  4. Detailed Cleaning: Employ cleaning sticks to meticulously clean the heating tube and its cover, avoiding contact with the heating blade.
  5. Preservation Tip: Clean the device after using a full pack of tobacco sticks to maintain your preferred taste profile.
  6. Guided Cleaning: Refer to the video tutorial for comprehensive insights into cleaning your IQOS ORIGINALS DUO.

Follow these steps to optimize your IQOS ORIGINALS DUO experience for continuous satisfaction and effortless maintenance.

Main Menu